SR2020AW FTTH CATV Optical Receiver With AGC And WDM
Model Number: SR2020AW
Brand: Softel
MOQ: 1
Extra-low noise
High output level
Low power consume
01
Product Description
Introduction
SR2020AW, the operating bandwidth of 47~1000MHz, is a low power, high performance, cost-effective triple play, FTTH CATV optical receiver, Whether used in analog television or digital television. Products with high sensitivity optical receiver tube and special low noise matching circuit. Receiving at high optical power can be adjusted by PAD level, played limiting output, so SR2020AW within a large dynamic range of the received optical power of +2 dBm ~-21dBm, have excellent characteristics.
Triple play, fiber to the home, using the SR2020AW can save a lot of optical fiber amplifier power resources. For operators, can greatly reduce the cost of building the network.
Features
1. Extra-low noise(3.8% modulate, -10dBm receive, CNR ≥ 45.3dB)
2. Wide dynamic receiving optical power range: within Pin=-16, MER≥36.1dB
3. Applicable GPON, EPON, compatible with any FTTx PON technology
4. Can save a large number of optical power resource, greatly reduce the network
configuration cost
5. Within 47~1000MHz bandwidth, all with excellent flatness feature ( FL≤±0.75dB )
6. Metal case, offer safeguard for optic electronic sensitive devices
7. High output level, can be used by many users
8. Low power consume, high performance, high cost performance
Main Application
1.CATV FTTH
2.Integration of three network
3.FTTH PON
Status Indication
1. Red: No optical input or optical power < -16dBm
2. Green: Optical power range ＞-16dBm
|
Performance |
Index |
Supplement |
||
|
Optic Feature |
CATV Work wavelength |
(nm) |
1540~1563 |
|
| Pass wavelength |
(nm) |
1310, 1490 |
||
| Channel Isolation |
(dB) |
≥40 |
1550nm &1490nm |
|
| Responsibility |
(A/W) |
≥0.85 |
1310nm |
|
|
≥0.9 |
1550nm |
|||
| Receiving power |
(dBm) |
+2~-18 |
Analog TV (CNR>45dB) |
|
|
+2~-20 |
Digital TV (MER>30dB) |
|||
| Optical return loss |
(dB) |
≥55 |
||
| Optical fiber connector |
SC/APC |
|||
|
RF Feature |
Work bandwidth |
(MHz) |
47~1000 |
|
| Flatness |
(dB) |
≤±0.75 |
47~1000MHz |
|
| Output level |
(dBμV) |
>78 |
Pin=-1~-14dBm AGC |
|
| Return loss |
(dB) |
≥14 |
47 ~ 862MHz |
|
| Output impedance |
(Ω) |
75 |
||
| Output port Number |
1 |
|||
| RF tie-in |
F-Female |
|||
|
Analog TV Link Feature |
Test channel |
(CH) |
59CH(PAL-D) |
|
| OMI |
(%) |
3.8 |
||
| CNR1 |
(dB) |
53.3 |
Pin=-2dBm |
|
| CNR2 |
(dB) |
45.3 |
Pin=-10dBm |
|
| CTB |
(dB) |
≤-61 |
||
| CSO |
(dB) |
≤-61 |
||
|
Digital TV Link Feature |
OMI |
(%) |
4.3 |
|
| MER |
(dB) |
≥36 |
Pin=-16dBm |
|
|
≥30 |
Pin=-20dBm |
|||
| BER |
(dB) |
<1.0E-9 |
Pin:+2~-21dBm |
|
|
General Feature |
Power supply |
(V) |
DC+12V |
±1.0V |
| Power Consume |
(W) |
≤3 |
+12VDC, 210mA |
|
| Work Temp |
(℃) |
-20 ~ +55 |
||
| Storage Temp |
(℃) |
-40 ~ 85 |
||
| Work relative temp |
(%) |
5 ~ 95 |
||
| Size |
(mm) |
50×88×22 |
||
Note:
1.CNR Test conditions: 59CHPAL-D,OMI= 3.8%
2.MER test conditions:
The Original Signal: MER= 39.0dB, BER<1.0E-9.
Test Frequency: 47~862MHz Full Channel, (The Curveis: 858.00MHz)
Red curve: OM=3.8%
Brown curve: OM=4.3%
3. Digital television Receiving Low Light, appropriate to increase the system modulation (OMl),can greatlyimprove the MER degradation.
SR2020AW FTTH CATV Optical Receiver With AGC And WDM.Datesheet
